Skip to main content

Application example

Continuous diameter measurement in coil processing

Titelbild

The Task

During coil processing, the current outer diameter is a key process variable. It serves as the basis for controlling unwinding and rewinding operations as well as for adjusting the belt speed. To ensure a stable material flow and enable proactive process control, the diameter must be measured continuously and reliably during operation. A sensor can be used to perform this task.

The Challenge

The contactless distance measurement is performed over distances of several meters and under challenging ambient conditions. Metallic, highly reflective, and highly absorptive surfaces, changing coil widths and material properties, as well as high temperatures, dust, and vibrations, affect the measurement. Moreover, the sensor must reliably detect significant differences between a full coil and one that is almost completely unwound. The measurement itself needs to be stable, reproducible, and capable of functioning without additional reflectors or mechanical systems.

Our Solution

A time-of-flight distance sensor continuously measures the distance to the coil surface. The current outer diameter is calculated from this measured value and passed as an analogue signal or digitally via IO-Link to the control system.
With a scanning distance of up to 15 meters, the sensor from the DTECT® Distance Series can be installed flexibly and at a safe distance from the system. The robust signal processing ensures reliable and stable measurement results, even on metallic, reflective surfaces.

Your Advantages

  • Continuous diameter measurement with no additional reflector
  • Stable measurements, even on glossy or dark surfaces
  • Contactless measurement with no mechanical wear
  • Fast parameter configuration and diagnostics via IO-Link

Recommended products for this application

我们的网站有多种语言版本。我们已检测到您的浏览器语言为 "中文".